AmbienTone is a flat panel loudspeaker in a modified gypsum plasterboard. It is installed in drywall constructions. In very few work steps. Once connected, fitted and sealed, AmbienTone can be wallpapered over, painted and even plastered over. A coat with a thickness of up to 2 mm will result in only a minimal loss of sound quality.
The wall must first be prepared with metal profiles. Create a recess in a gypsum plaster board (ceiling or wall), which is approx. 5 mm larger than the AmbienTone loudspeaker all the way around.
Remove the 2 transport locks located on the back of the loudspeaker and check that the loudspeaker is functioning correctly. Make sure to connect the loudspeaker! Place the loudspeaker in the prepared recess.
Secure the loudspeakers by screwing them onto the existing metal profiles. Standard, commercially-available drywall screws are recommended. The maximum screw spacing should be approx. 10 cm.
Spackle the groove in accordance with the directions of the plasterboard and filler manufacturers. We recommend the usage of gap covering duct tape.
Paint, wallpaper or plaster over AmbienTone and the drywall construction in any desired colour.